Fibaro Relay Switch 2X1.5 KW

Product Overview

The FIBARO Relay Switch (Double On/Off ) is small enough to be installed inside a back box or anywhere that requires control of up to two independent devices (up to 1500W each).

The Double On/Off Relay Switch can control devices either wirelessly or via the switch connected to the module


FIBARO Double Relay Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control two independent devices drawing up to 1500W each.
As with all other Actors, FIBARO Double Relay Switch allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.

  • Compatible with any Z-Wave Controller
  • Advanced microprocessor control
  • Executive element – electromagnetic, micro-gap relay switch
  • May be oparated by momentary or toggle switches
  • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
Power supply 110-240 V AC, 50/60 Hz
Rated load current (resistive load) 6.5A per channel,
10A total current
Power consumption up to 0.8W
Power output (resistive load) 2x1500W for 240V AC
2x750W for 120V AC
In accordance with EU standards RED 2014/53/EU
RoHS 2011/65/EU
Operational temperature 0-35°C
Active element micro-gap relay switch μ
Durability (resistive load, 6.5A) 200 000 switches
For installation in boxes  Ø ≥ 50mm, depth ≥ 60mm
Radio protocol Z-Wave
Radio signal power up to 1mW
Radio frequency 865.2 MHz 
Range up to 50 m outdoors
up to 30 m indoors
(depending on building materials)
Dimensions: (L x W x H)) 42.50 x 38.25 x 20.30 mm
Book an Appointment