Fibaro RGBW Controller

Product Overview

FIBARO RGBW Controller is a universal, Z-Wave compatible RGB/RGBW controller. FIBARO RGBW Controller uses PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. In addition the device supports up to four, 0V – 10V analog sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts..

Supported Loads

FIBARO RGBW Controller may control:

  • 12 / 24VDC powered RGB strips
  • 12 / 24VDC powered RGBW strips
  • 12 / 24VDC powered LED strips, bulbs, etc.
  • 12 / 24VDC powered halogen lights
  • 12 / 24VDC powered low output power fans

FIBARO RGBW Controller is a universal, Z-Wave compatible RGB/RGBW controller. FIBARO RGBW Controller uses PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. In addition the device supports up to four, 0V – 10V analog sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts.

  • Compatible with any Z-Wave Controller
  • Advanced microprocessor control
  • Different operating modes
  • Active power and energy metering functionality
  • Multiple colour presets
  • Active element: transistor
  • To be installed in standard wall switch boxes
Power supply 12/24V DC
Rated output power combined 12A (sum of all connected output channels)
6A for single output channel
PWM output frequency 244Hz
Electricity consumption 0.3W
Radio signal power 1mW
For installation in boxes Ø≥50 mm
Max load at 12V – 144W combined
at 24V – 288W combined
EU directive compliance RoHS 2011/65/EU
EMC 2004/108/EC
R&TTE 1999/5/EC
Radio protocol Z-Wave
Radio frequency 865.2 MHz 
Range up to 50m outdoors / up to 30m indoors
(depending on terrain and building structure)
Operational temperature 0 – 40°C
Dimensions (L x W x H) 42 x 37 x 17 mm

FIBARO RGBW Controller may control:

  • 12 / 24VDC powered RGB strips
  • 12 / 24VDC powered RGBW strips
  • 12 / 24VDC powered LED strips, bulbs, etc.
  • 12 / 24VDC powered halogen lights
  • 12 / 24VDC powered low output power fans

Additional features

  • 0-10V sensors signal readouts
  • 0-10V potentiometer signal readouts, and managing outputs accordingly
  • controlled by momentary or toggle switches
Book an Appointment