Fibaro Smoke Sensor

Product Overview

The Fibaro Smoke Sensor is a universal, Z-Wave compatible, optical smoke detector. The device can be battery powered (battery life approx. 3 years) or DC powered (12 or 24v DC). A Smoke alarm is signaled by a speaker, blinking LED diode  and through operating commands sent to the Z-Wave network devices. Additionally, smoke alarm notification may be sent to an alarm system or fire alarm system hub, through a NC contact terminals opening.

Optical detector allows for detecting smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperatute threshold is exceeded. Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED signaling diode signals fire, operating mode and may serve as the Z-Wave network range controller. The sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapour).

FIBARO Smoke Sensor is a universal, optical Z-Wave smoke detector. Fire alarm is signaled by sound, visual indicator blinking and by sending Z-Wave alarm and control commands.
The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which is programmable indicator of exceeding set temperature level.
FIBARO Smoke Sensor is designed to be placed on a wall or ceiling. Visual indicator signals fire, operating mode and is used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).

  • Compatible with any Z-Wave or Z-Wave+ Controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Extremely easy installation – simply install it in location prone to fire
  • Battery powered
  • 3 levels of sensors sensitivity
  • Built-in casing opening detector
  • Alarm is signaled by sound, visual indicator and Z-Wave control command
  • Programmable excess temperature warning
  • Automatic test performed every 10 seconds
Power supply CR123A battery, 3.0V DC
Operational temperature 0°C to 55°C
Operational humidity 0% to 93%
Measured temperature range: -20°C to 100°C
Temperature measuring accuracy: 0.5°C (within 0-55°C range)
EU directives compliance: EN 14604:2005
RED 2014/53/EU
RoHS 2011/65/EU
Radio protocol Z-Wave
Radio frequency 865.2 MHz 
Range up to 50m outdoors
up to 30m indoors
(depending on terrain and building structure)
Dimensions (diameter x height) 65 x 28 mm
Book an Appointment