Fibaro Universal Binary Sensor

Product Overview

Fibaro Universal Binary Sensor is a unique wireless module for enhancing the functionality of any existing binary output system.  The sensors enable such devices to communicate wirelessly with the FIBARO smart home system.

The module also functions as a wireless temperature sensor system when connected to the DS18B20 temperature sensors. Each module can service up to two binary sensors and four DS18B20 temperature sensors. The Sensor was designed for installation inside the housing of another device whose functionality is to be enhanced (e.g. an alarm PIR sensor).

Fibaro Universal Binary Sensor is ideally suited for the wireless collection of data from other sensors. Once the appropriate additional safety housing have been installed, the sensor can be used in areas with high humidity and temperature.

The sensor is often used for integrating the FIBARO system with existing alarm and measurement systems. Its sits in line and is completely transparent to the instrumented system thus allowing it to function normally as before.

FIBARO Universal Binary Sensor is a wireless module allowing to improve the functionality of any wired sensor with a binary output by adding Z-Wave network communication.

Moreover, the module allows for wireless communication between the system and the DS18B20 temperature sensors. It can service up to two binary sensors and up to four temperature sensors.

The device is designed to be installed in the housing of a sensor or another device, whenever wireless collection of data from the wired sensors is required.

  • Compatible with any Z-Wave Controller
  • Advanced microprocessor control
  • Compatible with regular and parametric alarm lines (can be connected to 2 alarm detectors)
  • Compatible with binary sensors (can be connected to 2 binary outputs)
  • Compatible with DS18B20 temperature sensors (can be connected to four DS18B20 temperature sensors)
Power supply 9-30V DC ±10%
Inputs 2 potential-free inputs
1 digital input 1-wire
Outputs 2 potential-free outputs
Maximum current carrying capacity of outputs 150mA
Maximum voltage at output contacts 36V DC / 24V AC ±5%
Measurement range -55°C – +126°C
Operational temperature 0-40°C
Supported temperature sensors up to 4 DS18B20 sensors
In accordance with EU standards RoHS 2011/65/EU
EMC 2004/108/EC
R&TTE 1999/5/EC
Radio protocol Z-Wave
Radio signal power up to 1mW
Radio frequency 865.2 MHz 
Range up to 50 m outdoors
up to 30 m indoors
(depending on building materials)
Dimensions: (L x W x H)): 27.3 x 14.5 x 12 mm
Book an Appointment